Skip to content

How to Change a Platen on the AR T500 DTG Printer?

how to change a platen on the ar-t500 dtg printer

Introduction

Nowadays, DTG or Direct-to-garment printers are very popular in the garment industry. Among them, the Ar-t500 model is a great one. Some of you may have used this. And some of you want to know how to change a platen on the ar-t500 dtg printer. Keep on reading to know about the process in detail. But before that, if you do not have any idea about this excellent model of DTG printer, here are its specifications for you – 

Specifications of the Ar-t500 DTG printer

how to change a platen on the ar-t500 dtg printer
  • It has a display of intelligent control.
  • It is able to pump the ink on its own.
  • It consists of textile molds of standard quality. 
  • It can also decode the grating independently. 
  • Its resolution is pretty high that can reach up to 5760*1440dpi. 

Here is all about how to change a platen on the ar-t500 dtg printer.

The process of changing a platen on the Ar-t500 DTG printer

In order to change a platen on the Ar-t500 DTG printer, you need to follow the steps mentioned below. Know more about how to change a platen on the ar-t500 dtg printer.

1. Take the platen out of the printer

At first, you need to click on the Platen button on the printer. It will make the platen eject out into the position where it is loaded. Then you need to take the platen aside from the printer. 

2. Apply a cleaner to the platen

Clean the adhesive on the platen with a suitable cleaner. But it is better to test the cleaner on something else before you apply it to the platen. It will save the platen from damage. 

3. Clean the surface of the platen

Now, it is time to clean the surface of the platen. For this, you can use any soft cloth. You have to wet the cloth and apply a very mild detergent to it. Then clean the platen with this cloth. After that, you need another soft cloth but this time it should be a dry one. Next, wipe the surface of the platen with it and make the platen completely dry.

4. Place a new platen sheet

how to change a platen on the ar-t500 dtg printer

The platen is now ready to take a new platen sheet. Place the sheet on the platen. To do it properly, you have to peel the release-coated paper off from the new platen sheet at the time of its installation. You should start this process of peeling off one corner of the platen sheet. 

5. Go slow and be careful

When you are placing the new platen sheet on the platen, you do it slowly and be careful. The adhesive used on the platen sheet is very sticky and strong. If you stick it and then want to reposition it properly, there is a chance that you will not be able to do it.

6. Insert the platen into the printer

Once you have positioned the new platen sheet properly, the platen is ready to go back into the printer. Hold the platen steadily and insert it into the printer the way it should be. Do not make haste while doing this. Do it slowly. 

And with this step, you are done! You have successfully changed the platen on your Ar-t500 DTG printer. So, it was not that difficult a process after all. 

Here is all about how to change a platen on the ar-t500 dtg printer.

FAQs

1. Can platen sheets of DTG printers be changed at home?

Yes, it is possible. Even anyone can do it. The process of changing a platen sheet on a DTG printer is pretty simple. You just need to follow some steps carefully. And you will be able to do it successfully without anyone’s help. 

2. How can a platen sheet be changed on a DTG printer?

You can change the platen sheet of a DTG printer easily at home. The process is not that difficult to go through. To change a platen sheet on a DTG printer, you only need to follow the steps mentioned below –

  1. Remove the platen sheet along with the platen from the printer.
  2. Clean the platen surface.
  3. Position a new platen sheet on the platen.
  4. Insert the platen back into the printer.